In IPC Class 2 standards, the copper plating in holes is essential for ensuring high-performance PCBs. This article focuses on the importance of meeting the 20um minimum copper thickness requirement, specifically provided by RingPCB Technology Co., Ltd.
Introduction to Copper Plating in Holes of IPC Class 2 Standards
In the world of printed circuit boards (PCBs), meeting specific standards for copper plating is crucial for performance and reliability. The IPC Class 2 standard is widely recognized for its requirement of reliable performance for products used in electronic devices under normal operating conditions. One of the key aspects of this standard is the copper plating in holes.
In particular, RingPCB Technology Co., Ltd specializes in providing a minimum copper thickness of 20um copper in hole wall, which is essential for ensuring high-quality connections and stable electrical conductivity. This standard is critical for meeting the industry’s increasing demand for miniaturization and enhanced performance in electronics.
The IPC Class 2 standard requires that the copper plating inside the PCB holes meet specific thickness levels. For many applications, the thickness of copper plating in the holes must be a minimum of 20um, which ensures sufficient strength and conductivity. RingPCB Technology Co., Ltd's process ensures that this requirement is consistently met, providing excellent performance in their products.
The copper plating in the holes is vital to the overall performance of the PCB, as it directly affects the electrical conductivity and the mechanical integrity of the board. A high-quality copper plating guarantees a strong and reliable connection for all components, ensuring that the board performs well under normal operating conditions. RingPCB Technology’s commitment to providing 20um min copper in hole wall helps to meet these requirements, giving customers the assurance of quality and reliability in their products.
Conclusion
The quality of copper plating in PCB holes is a critical aspect of the IPC Class 2 standard. RingPCB Technology Co., Ltd's dedication to offering a minimum copper thickness of 20um copper in hole wall ensures that their products meet the necessary standards, providing high-quality and reliable performance in a wide range of applications.
